OUR RIGS
- Hopper GXXTA drill rig – 2012 model upfit on 2 tandem dual trailers – a 5,000' class rig. Our Hopper rig is capable of drilling depths up to 5,000' deep and handling tool or casing loads up to 210,000 pounds. Our largest rig, the Hopper is used for the biggest, deepest, and hardest drilling projects across the State of Texas. This rig is accompanied by 750 GPM mud pumps and mud systems.
- Gefco SS185K drill rig – 2004 model on 4 axle crane carrier – a 4,000’ class rig. Capacity for handling tool or casing loads up to 185,000 pounds. This rig is also accompanied by 750 GPM mud pumps and mud systems.
- Wilson Senior drill rig – 2006 model upfit on 2 tandem dual trailers – a 4000' class rig. Our Wilson rig has completed projects over 2500' deep and installed casings up to 24" diameter. This rig is also accompanied by 750 GPM mud pumps and mud systems.
- Centerline ‘PortaMiller’ 2000 drill rig – 2019 model on Kenworth C500 4 axle truck – a 2000' class rig. This custom rig, equipped for drilling to depths up to 2,000', is equipped with 2 Centerline 7½"x10" duplex mud pumps for 600 GPM mud capacity, and a 54' derrick to handle range III, 40’+ casings up to 20” diameter.
- Centerline ‘PortaStar’ 1500 drill rig – 2020 model on International Paystar tandem diesel truck – a 1500' class rig. Equipped with a Centerline 7½”x 10” duplex mud pump, this rig is capable to complete wells up to 1,500'. The 52' derrick is rigged to handle range III, 40’+ casings up to 20” diameter.
- Speedstar SS135 drill rig – on 2001 Crane Carrier tandem diesel truck – a 1,350' class rig. The Speedstar is equipped with Centerline 7½”x 10” duplex mud pump and is well balanced with wide flotation tires on the front, making it particularly well suited for getting in and out of very soft and wet locations.
- Portadrill 501 drill rig – on 1995 International diesel truck – a 1000' class rig. The 501 Portadrill, is equipped with Centerline 7½”x 10” duplex mud pump and has completed projects up to 1,100' deep.
SERVICE / PULLING RIGS
- Semco S25,000 Pull Rig – 100,000# capacity – on 2004 Peterbilt tandem axle w/ 330 hp Cat engine. This rig is capable of handling the biggest and deepest pulling projects in Texas.
- Semco S15,000 Pull Rig – 50,000# capacity – on 2005 International 4300 w/ DT466 diesel engine. This rig is capable of handling very large and deep pulling projects across Texas.
- Pulstar P20,000 Pull Rig – 20,000# capacity – on 2003 Freightliner 2½ ton diesel truck. This pulling rig is capable of handling all residential and most municipal or community pump pulling projects in East Texas.
- Pulstar P10,000HD on 2023 Ram 5500 4x4 truck. The 15,000# capacity pulling rig is capable of handling all residential and light municipal or community pump pulling projects in East Texas.
- 5T Smeal on Ram 5500 4x4 truck. The 12,000# capacity pulling rig is capable of handling all residential pump pulling projects in East Texas.
- 5T Smeal on 2018 Ram 4500 4WD diesel truck. The 12,000# capacity pulling rig is capable of handling all residential pump pulling projects in East Texas.
MUD RECYCLING SYSTEMS & MUD PUMPS
- Kemtron Tango 800 HD1 mud system, 2015 model w/175kw generator – 800 GPM mud processing capacity
- Centerline 600 mud processing system, 2013 model w/150kw generator – 600 GPM mud processing capacity
- Ideco 7½"x 16", 750 GPM skid-mounted duplex mud pump w/ Cat 379 diesel engine – unit 1
- Ideco 7½"x 16", 750 GPM skid-mounted duplex mud pump w/ Cat 379 diesel engine – unit 2
- Skytop Brewster 7½"x 14", 750 GPM skid-mounted duplex mud pump w/ 60 series Detroit diesel engine – unit 3
- Skytop Brewster 7½"x 14", 750 GPM skid-mounted duplex mud pump w/ Cat 379 diesel engine – unit 4
- 2008 Centerline MHPA skid-mounted Perkins diesel Mono pump unit
WATER TANK TRUCKS & TRACTOR TRUCKS
- 1996 Kenworth water truck – 2,700 gallon tanker
- 1991 International Paystar water truck – 2,600 gallon tanker
- 1988 Mack water truck – 2,600 gallon tanker
- 2001 Kenworth T800 tractor truck, double frame w/ 475 hp Cat diesel, 46K rears, 20K front
- 1991 Freightliner tractor and winch truck
- 1990 Kenworth 425 hp tractor truck
- 2005 Kenworth C500 4 axle triple frame winch truck w/ 475 hp Cat
